GC Factory Uncategorized Water Tank Construction

Water Tank Construction

Water Tank Construction

There are several steps involved in Tankproinc | tank construction water tank construction. The first step is to measure the space available and the volume of water required for the tank. The next step is to determine the capacity of the tank. The tank size depends on the required capacity of water and the area available for its installation. If necessary, you can divide the tank into several smaller ones to save space and design them with partitions. Lastly, the bottom slab of the water tank shall be made of reinforced cement concrete. The cement content of the concrete must be at least one third of the total volume of the water tank.

The first step in water tank construction involves digging a hole at a depth of at least 50 cm below the surface. You also need to make sure that the water level in your area is above the water level in the tank. When digging the hole, make sure to leave an approximately 15-cm gap between the tank’s battered wall and the surrounding soil. Once the base is ready, the tank should be placed on a concrete platform, which should be at least 250 mm deep and a few centimetres larger than the above-ground water tank.

There are two main types of tanks, namely, stainless steel and non-galvanised steel. Stainless steel tanks are generally more expensive than their non-galvanised counterparts. In both cases, they can store a significant volume of water. You must also make sure that the water tank is certified in a timely manner. As mentioned, water tank construction is a vital aspect of risk management. Therefore, ensure that your tank is constructed according to the required standards and specifications.

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Post